Key Digital 4K UHDoTP HDR HDMI Extender Tx + Rx Kit

Item Code: KD-EX18G

  • 4K UHDoTP with HDR HDMI Extender Tx + Rx Kit
  • Extends 4K 18G to 35m (115ft), 1080p to 50m (164ft)
  • 4K to 1080p Down Convert
  • HDMI Pass Thru
  • Power over CAT
  • 2 Way IR
  • Handshake Control
  • Forced HPD
7 (EA) in Stock

Status: In Stock

EA
Comments or instructions

Features

Features

  • UHDoTP via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • 4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
  • Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate UHDoTP transmission channel
  • 4K to 1080p Down Convert: Optional resolution conversion applied at UHDoTP output provides added integration options in retrofit installations as well as added distance performance
  • 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
  • Flexible Power over CAT (PoC): Only one power connection needed. Tx may power Rx, or Rx may power Tx.
  • Low Profile: Slim chassis design
  • Signal Extension: For resolution and cable quality
    • 4K/UHD: Up to 35m (115ft) using CAT5e/6, up to 40m (131ft) using CAT6A STP
    • 1080p: Up to 50m (164ft) maximum, up to 60m (197ft) using CAT6A STP
    • Minimum: 5m (17ft) CAT5e/6 cable length required for all resolutions
  • HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:2:2/8 bit
  • EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected display/output device
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID handshake control, and Hot Plug Detection control
  • IR Sensor: Sensor powering via +5V on IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
  • HDMI Pass-Through: Enables connection to local monitor or AV Receiver.
  • Surround Audio Support: On HDMI pass-thru and UHDoTP outputs:
    • HDMI Pass-Thru: Supports Dolby®, Dolby® TrueHD, DTS™ and DTS-HD™ (formats up to 7.1)
    • UHDoTP Output: Supports Dolby®, DTS™ (formats up to 5.1/6.1)

Specifications

Specifications

Specifications for: KD-EX18G: Key Digital 4K UHDoTP HDR HDMI Extender Tx + Rx Kit
Technical
Inputs Tx (Each)1 HDMI, 1 IR
Outputs Tx (Each)1 UHDoTP, 1 IR
Inputs Rx (Each)1 UHDoTP, 1 IR
Outputs Rx (Each)1 HDMI, 1 IR
BandwidthTMDS bandwidth 18Gbps
Deep Color SupportDigital video formats in Deep Color Mode up to 12 bits per color
DDC CommunicationEDID and HDCP Bi-directional buffering from Display to Source 
HDMI ConnectorType A, 19 Pin Female
RJ45 ConnectorShielded Link Connector, UHDoTP 
IR In & Out Connectors (Each)3.5mm
Power(1) 12V/2A, 24W DC Power Supply.
100-240VAC, 50-60Hz.
Interchangeable transformer plug.
General
RegulationCE, RoHS, WEEE, EAC 
EnclosureBlack Metal 
Product (Each)4.1” x 2.8” x 0.875”
Weight0.75 lbs
Accessories4x Mounting Brackets
1x IR Emitter
1x IR Sensor
1x Power Supply
To top