Cymbol 16-Port 100Mbps POE+ Ethernet Switch w/ 2 Gig RJ45 2 SFP Uplink
Details
Details
Intelligent PoE
Provides control over power consumption and offers real-time monitoring to ensure power supplies receive priority with important ports and to prevent malfunctions caused by changes in power consumption. Supports ultra wide power supplies and is able to adapt to IP Camera power fluctuations.
Hi-PoE 60W (Orange Port)
In addition to the IEEE802.3af, IEEE802.3at and IEEE802.3bt standards, the orange port also supports a maximum power output of 60W for powering Hi-PoE devices.
Long Distance PoE
By dialing or enabling long-range transmission on the WEB interface, the transmission distance of a PoE port can increase up to 250m, meeting the requirements of wired transmission (bandwidth reduced to 10 Mbps).
PoE Watchdog
Adopts the innovative PoE Watchdog. PoE Watchdog can be switched on by toggling on PD Alive. It enables the switch to automatically detect the ports status and restart the failed port in case an IP Camera connection fails.This enables intelligent operation and maintenance management in its truest sense, reducing manual maintenance costs.
- Intelligent Plug and Play Ethernet Switch
- 16 x 10/100Mbps RJ45 Ports (PoE+)
- Port 1-2 ≤60W, Port 3-16 ≤30W,Total ≤135W
- 2 x 10/100Mbps RJ45 Ports (Uplink)
- 2 x 1000Mbps SFP Ports (Uplink)
- Long Distance PoETransmission
- PoE Watchdog
- OperatingTemperature: –10°C to 55°C
| Specifications for: CY-MS16POE-22: Cymbol 16-Port 100Mbps POE+ Ethernet Switch w/ 2 Gig RJ45 2 SFP Uplink | |
|---|---|
| Performance | |
| Layer | Layer 2 |
| Managed | No (Functional DIP switch provides port isolation, long distance power supply, PoE watchdog and QoS control) |
| Switching Capacity | 7.2 Gbps |
| Packet Forwarding Rate | 5.3568 Mbps |
| Packet Buffer Memory | 4 Mbit |
| MAC Table Size | 8K |
| Hardware | |
| Data Transmission Ports | 1-16: 16 × RJ45 10/100Mbps |
| 17-18: 2 × RJ45 10/100/1000Mbps (Uplink) | |
| 19-20: 2 × SFP 1000Mbps (Uplink) | |
| Power Supply | 100-240V AC |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10%–90% |
| POE | |
| PoE Budget | Port 1–2 ≤60W, Port 3–16 ≤30W, Total ≤135W |
| PoE Pin Assignment | PoE/Hi-PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) |
| PoE Power Management | Yes |
| Long Distance PoE Transmission | Yes |
| Power Consumption | Idling: 5W |
| Full load: 135W | |
| PoE Standard | IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt |
| General | |
| Rack Mountable | Yes |
| VLAN | Port Isolation |
| QoS | Yes |
| System Maintenance | PD Alive |
| ESD | Air discharge: 8kV |
| Contact discharge: 6kV | |
| Lightning Protection | Common mode: 4kV |
| Differential mode: 2kV | |
| Dimensions | 440mm × 300mm × 44mm (17.32" × 11.81" × 1.73") |
| Communication Standards | IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3z |
