Key Digital 4K UHD AV over IP Encoder PoE HDMI Passthrough 2x IR/RS-232

Item Code: KD-IP822ENC

4K UHD AV over IP Encoder, PoE, HDMI Pass-Thru, 2x IR/RS-232 ports

1 (EA) in Stock

Status: In Stock

EA
Comments or instructions

Features

Features

  • AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
  • Inter-System Compatibility: Fully compatible with KD-IP922ENC and DEC units / systems
  • Video Wall Processing: Encoder + Decoder systems create video walls with up to 16x16, 256 total maximum displays.
  • Control: 2 multi-function ports may be used as third-party control interface, Compass Control® Pro master controller, control extension via IP, or callable via KeyCode open API
  • Key Digital® App Ready: Network scan & detect populates pre-built GUI including optional image preview, finger drag video wall management, and display control via IR
  • KDMS Pro Ready: PC software for unit & system setup and control UI with clean End-User mode option including optional image preview, mouse-drag video wall management, and display control via IR and PJ Link IP.
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit (10.2Gbps max bandwidth)
  • 4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p at each decoder, enabling monitors to display content at optimal resolution at all times
  • HDR (High Dynamic Range): HDR is achieved with AppleTV source at 4K/30 [4:2:2] 12bit deep color, enabling more life-like images through a greater range of luminance levels
  • Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or point-to-point
  • Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
  • Redundant Power Connection: Added reliability for non-PoE integration. Power supply sold separately
  • Data Stream Bandwidth:< 900Mbps
  • Latency:<40ms at 4K. Less at lower resolution
  • Installation: Use KD-SMS16 to cleanly install up to twelve KD-IP822ENC/DEC units in rack
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60 f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected to Decoder
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units
  • RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector
  • RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
  • Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open API: Compass Control® Pro, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.

Specifications

Specifications

Specifications for: KD-IP822ENC: Key Digital 4K UHD AV over IP Encoder PoE HDMI Passthrough 2x IR/RS-232
Inputs KD-IP822ENC (Each)1 HDMI, 2 In/out Multifunction Control (IR, Bi-Directional RS-232, Trigger), 1 TCP/IP
Outputs KD-IP822ENC (Each)1 HDMI, 1 AV over IP
Inputs KD-IP822DEC (Each)1 HDMI, 2 In/out Multifunction Control (IR, Bi-Directional RS-232, Trigger), 1 TCP/IP
Outputs KD-IP822DEC (Each)1 HDMI
DDC Signal (Data)5 Volts p-p (TTL)
HDMI Video/Audio SignalInput Video Signal: 1.2 Volts p-p
HDMI ConnectorType A, 19 Pin Female
RJ45 ConnectorShielded TCP/IP 1G/100 BaseT, PoE
Control Connectors3-Pin Phoenix
RegulationCE, RoHS, WEEE
EnclosureBlack Metal
Power (power supply not included)KD-PS12V1ASC, 12V/1A, 100-240VAC, 50-60Hz
Product Dimensions6.25" x 1.1" x 3.1"
Packaging Dimensions9.8" x 4.5" x 3.35"
Product Weight0.9 lb
Shipping Weight1.5 lb
BTU30.7 per hour
Operating Temperature150° F (65.5° C)
Surface Temperature104° F (40° C) at 77° F (room temperature)
To top