Intelligent PoE

Provides control over power consumption and offers real-time monitoring to ensure power supplies receive priority with important ports and to prevent malfunctions caused by changes in power consumption. Supports ultra wide power supplies and is able to adapt to IP Camera power fluctuations.

Hi-PoE 60W (Orange Port)

In addition to the IEEE802.3af, IEEE802.3at and IEEE802.3bt standards, the orange port also supports a maximum power output of 60W for powering Hi-PoE devices.

Long Distance PoE

By dialing or enabling long-range transmission on the WEB interface, the transmission distance of a PoE port can increase up to 250m, meeting the requirements of wired transmission (bandwidth reduced to 10 Mbps).

PoE Watchdog

Adopts the innovative PoE Watchdog. PoE Watchdog can be switched on by toggling on PD Alive. It enables the switch to automatically detect the ports status and restart the failed port in case an IP Camera connection fails.This enables intelligent operation and maintenance management in its truest sense, reducing manual maintenance costs.

8-pin Assignment PoE Power Supply

Supports 8-pin simultaneous power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time. Compatibility with IP Cameras are enhanced. Cable loss is reduced and loading capacity is increased.

• Intelligent Plug and Play Ethernet Switch
• 4 x 10/100/1000Mbps RJ45 Ports (PoE+)
  • Port 1 ≤60W, Port 2 – 4 ≤30W,Total 60W
• 2 x 10/100/1000Mbps RJ45 Ports (Uplink)
• Hi-PoE 60W (Orange Port)
• All-Gigabit Ports
• Long Distance PoE Transmission
• PoE Watchdog
• Wide Working Temperature
• Operating Temperature: –10°C to 55°C